Information

Icon
Icon
Honeywell Intrusion VISTA-20P
Honeywell Intrusion VISTA-20P

Honeywell Intrusion VISTA-20P VISTA20P Ademco 8 Zone Wired Alarm Control Panel

Manufacturer Name & URL:

Honeywell International, Inc. website is http://www.Honeywell.com
ELVESsupply.com SKU:  VEN10-VISTA-20P
Manufacturer:  Honeywell Intrusion
Manufacturer Part Number:  VISTA-20P
Model Number:  VISTA-20P
Browse By ALL other  Honeywell Intrusion Products
Honeywell Intrusion VISTA-20P

Availability:

In Stock

UPC / GTIN-12:

781410417571

EAN / GTIN-13:

Brief Product Description:

VISTA20P Ademco 8 Zone Wired Alarm Control Panel

Description

The Honeywell VISTA-20P is an alarm control panel and a member of the Honeywell VISTA Series of security systems. This workhorse of a panel has been around for a very long time, once being under known as the ADEMCO VISTA 20P. While the VISTA-20P is considered a residential alarm control panel, it is certainly equipped with enough features to be used in commercial settings as well. The VISTA-20P consists of a circuit board installed inside of a metal alarm cabinet. You can connect alarm keypads, hardwired alarm devices, wireless receivers, alarm sirens, etc. to the alarm control panel’s circuit board to customize your Honeywell home security system. Unlike the self-contained wireless alarm control panels such as the Honeywell LYNX Plus or Honeywell LYNX Touch, the VISTA-20P alarm control panel does need to be paired with at least (1) alarm keypad to control your home security system. The Honeywell VISTA-20P alarm control panel supports up to (48) total zones of protection. There are (8) hardwired zones built into the alarm control panel itself. Using the zone doubling feature, you can expand those (8) zones up to a total of (15) zones. You can also add wired or wireless expansion modules to expand the total number of zones. When upgraded with a Honeywell 5881ENH unlimited zone wireless receiver, you can add up to (40) wireless zones using any of the Honeywell 5800 Series wireless devices for a total of (48) zones of protection. You can also use hardwired zone expanders, like the Honeywell 4129, if you would like to use up to (48) wired zones. In addition to the (48) possible zones, you can also program up to (16) wireless key fob buttons which do not take up any of the protection zones. Zone 1 on the VISTA-20P is setup as a fire protection zone and supports up to (16) two-wire smoke detectors but can also be reprogrammed for any other zone type as well. The Honeywell VISTA-20P is also partitionable and features (2) partitions which can protect (2) independent areas. There is also an optional 3rd partition called a common partition. You are able to arm either partition, or both, while leaving the common area disarmed so that you have access to the other partitions. The Honeywell VISTA-20P is controlled by wired alarm keypads and you can add up to (8) console keypads such as the Honeywell 6150, Honeywell 6150RF, or Honeywell 6160V. In addition to the (8) console keypads, you can also add up to (4) touchscreen keypads, including the Honeywell Tuxedo Touch or Honeywell Tuxedo Touch WIFI using the (4) AUI device addresses. We do not recommend using an AUI touchscreen keypad to program your Honeywell VISTA-20P. In fact, a fixed English console keypad such as the Honeywell 6148 is not recommended for alarm control panel programming either as you will not be able to navigate the *56 zone programming menus. Alarm Grid suggests at least one alphanumeric alarm keypad such as the Honeywell 6160 to be installed with your VISTA-20P for full programming access. The Honeywell 6160RF alarm keypad with unlimited zone wireless receiver is an ideal addition to a VISTA-20P alarm control panel as it upgrades the VISTA-20P with (40) available wireless zones and provides access to the advanced programming menus using a single device. The Honeywell alarm control panel is powered by an included plug-in 120VAC transformer (Honeywell 1321) which must be wired to terminals 1 and 2 on the VISTA-20P alarm control panel’s terminal strip. Terminals 4 and 5 provide auxiliary power (up to a maximum of 12VDC, 600mA) for powering devices like keypads, motion detectors, glass break detectors, etc. Terminals 3 and 4 supply up to 12VDC, 2AMP alarm output for compatible sounders. When a burglar alarm is tripped, the VISTA-20P uses a steady output and when a fire alarm is tripped, a temporal pulse is used. A rechargeable sealed lead-acid type battery can also be used to provide backup power during power outages. You must use at least a 12VDC, 4AH backup battery which should provide up to (24) hours of backup power. You can use terminals 21-24 to wire a traditional phone line to your Honeywell VISTA-20P if you want phone line alarm monitoring for your alarm control panel. As more and more security system owners are getting rid of their home telephones, the VISTA-20P is also compatible with the AlarmNet alternative alarm monitoring communicators. Add the Honeywell 7847i for internet alarm monitoring, the Honeywell GSMX or Honeywell iGSMV for dual path monitoring which uses both internet and cellular GSM communications.

Reward Points

117 points will be rewarded to you when you buy this item.

You May Also Like

Honeywell Intrusion V2080WKT206 V20P 6280W Is335
374.79
Average Rating(0)
Out of stock
Honeywell Intrusion V1550KT208 Vista-15P 6150 Is3035
174.79
Average Rating(0)
Out of stock
Honeywell Intrusion V21IP-WFSKT9 Vista-21Ip Tuxwifis 467
581.79
Average Rating(0)
Out of stock

Recently Viewed Items